JX Filtration ⁽⁶⁴⁾

Diaphragm Filter Press is a filter press with an elastic film installed between the filter plate and the filter cloth. In the process of use, when the feeding is over, the high-pressure fluid or gas medium can be injected into the diaphragm plate, at which time…

For water purification plants and sewage treatment plants, high-performance Sludge Dewatering Centrifuges are an ideal solution. It is highly adaptable to sludge, while having larger treatment capacity, at low concentrations (SS 0. 5%) case, no need to be equipped with a thickener, the same can…

Belt filter press It is mainly used for the treatment of sludge that has not been thickened by the thickening tank (such as the residual sludge of AO method), relying on the pre-dewatering of the thickening of the rotor, which is equivalent to the dual…

The Sludge Dewatering Machine can be used for the treatment of high and low concentration sludge. It can realize 24-hour automatic operation and reduce the work intensity of the staff. The body is almost entirely made of stainless steel greatly extend the service life. The…

The plate and frame filter press is composed of filter plate and filter frame arranged to form a filter chamber (the filter plate is a vertical plane, the filter frame is an empty frame, and a filter plate and a filter frame are combined to…

The Volute Press uses the automatic renewal cake filtration technology instead of the traditional filter screen filtration, and its own renewal cake filtration technology ensures the continuous and stable mud-water separation effect of the dewatering machine. It is a new type of solid-liquid separation equipment, which…

Dissolved air flotation is designed to remove biochemical oxygen demand, and oil and grease, total suspended solids from wastewater. It is suitable for treating wastewater with low turbidity, high saturation, high organic compound content, low oil content, low surface active chemical content or with algae…

The main body of the Screw Press consists of a fixed ring and a moving ring overlapping, with a spiral shaft running through it. It is integrating concentration and dewatering function. The front section is the concentration section and the back section is the dewatering…

Based on the level of automation, dosing device can be divided into 3 types: Half automatic and manual types are more economical and practical. The specific model selection based on the investment cost and operation cost. However, the most common used type is fully automatic…

Screw Press Sludge Dewatering Machine, It's clog-free. It can reduce the sedimentation tank and thicken the sludge tank,saving sewage plant construction costs.Using screw and moving rings to clean itself as a clog-free structure and automatically controlled by the PLC. The Screw Press Sludge Dewatering Machine…