Belt filter press It is mainly used for the treatment of sludge that has not been thickened by the thickening tank (such as the residual sludge of AO method), relying on the pre-dewatering of the thickening of the rotor, which is equivalent to the dual…
Read More
The Sludge Dewatering Machine can be used for the treatment of high and low concentration sludge. It can realize 24-hour automatic operation and reduce the work intensity of the staff. The body is almost entirely made of stainless steel greatly extend the service life. The…
Read More
The plate and frame filter press is composed of filter plate and filter frame arranged to form a filter chamber (the filter plate is a vertical plane, the filter frame is an empty frame, and a filter plate and a filter frame are combined to…
Read More
The Volute Press uses the automatic renewal cake filtration technology instead of the traditional filter screen filtration, and its own renewal cake filtration technology ensures the continuous and stable mud-water separation effect of the dewatering machine. It is a new type of solid-liquid separation equipment, which…
Read More
Dissolved air flotation is designed to remove biochemical oxygen demand, and oil and grease, total suspended solids from wastewater. It is suitable for treating wastewater with low turbidity, high saturation, high organic compound content, low oil content, low surface active chemical content or with algae…
Read More
Contact us
The main body of the Screw Press consists of a fixed ring and a moving ring overlapping, with a spiral shaft running through it. It is integrating concentration and dewatering function. The front section is the concentration section and the back section is the dewatering…
Read More
Based on the level of automation, dosing device can be divided into 3 types: Half automatic and manual types are more economical and practical. The specific model selection based on the investment cost and operation cost. However, the most common used type is fully automatic…
Read More
Screw Press Sludge Dewatering Machine, It's clog-free. It can reduce the sedimentation tank and thicken the sludge tank,saving sewage plant construction costs.Using screw and moving rings to clean itself as a clog-free structure and automatically controlled by the PLC. The Screw Press Sludge Dewatering Machine…
Read More
Sludge Dewatering Press, which uses the screw extrusion principle, is a new type of solid-liquid separation device.It reaches the goal of extrusion dewatering sludge by the powerful extrusion pressure of changing the screw diameter and distance and the small spacing between movable annular plates and…
Read More
JX Filtration as the most professional Dewatering Machine Manufacturers, our single dewatering machine processing dry sludge volume DS up to 5kg/h-800kg/h (multiple groups of equipment each group can operate separately and do not affect each other). The sludge dewatering machine consists of below parts: Coagulation…
Read More
